STANDARD COMPOSITION
1.Temperature Control Mode: pre-heating control, servo control & manual control;
2. Instant Parameter Display: set temp, skin temp, heat power rate;
3. Built-in APGAR Timer and >37°C preset function
4. Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
5. Tilting Bed with Rotary Radiant Head;
6. X-ray Cassette Tray under infant bed, examination light of high illuminance;
7. Use anti-blast quartz infrared tube as radiant heating source.
8. HNT-2000A Infant Radiant Warmer Add: Intra-low-pressure suction machine
ECHNICAL SPECIFICATION
| Power | AC 110 / 220 V, 50Hz / 60Hz | |||
| Input Power | ≤1000VA | |||
| Temperature control range and relative specification | Control mode | Pre-warm mode, manual mode, baby mode | ||
| Temperature control range | 25°C~37°C for set temperature ≤37°C | |||
| 37°C~38°C, for set temperature >37°C | ||||
| Skin temperature sensor measure range | 20°C~42°C | |||
| Deviation between sensor measure temperature and control temperature | ≤0.5°C | |||
| Skin Sensor Precision | ≤0.3°C | |||
| Bed surface temperature Uniformity | ≤1°C | |||
| Temperature Rise Time | ≤45min | |||
| Bed tiltable | continues adjustable in ±10° | |||
| Alarm | Sensor failure alarm | Alarm with audible and visual when sensor open circuit, short circuit or disconnect, cut off power. | ||
| Over temperature alarm | Alarm with audible and visual when displayed temperature was approach 38°C for set temperature ≤37°C, or approach 39°C for set temperature >37°C, cut off power. | |||
| Deviation alarm | After temperature equilibrium, alarm with audible and visual when displayed temperature was 1°C above or below control temperature, cut off power if above 1°C. | |||
| Power failure alarm | Alarm with audible and visual when power failure | |||
| APGAR time | Alarm with audible when run between 50 seconds to 1 minute, 4 minutes 50 seconds to 5 minutes, 9 minutes 50 seconds to 10 minutes. | |||
| Environment Temperature (It is a suggestion that please do not use outside of the allow environment.) | Operate temperature range | 18°C~30°C | ||
| Store temperature range | -20°C~+55°C | |||
| Environment Humidity | Operate humidity range | 30%RH~75%RH | ||
| Store humidity range | ≤93%RH | |||
| Atmospheric pressure | Transport and Store atmospheric pressure range | 500hPa~1060hPa | ||
| Operate atmospheric pressure range | 700hPa~1060hPa | |||
| Stream velocity | Ambit environment stream velocity | ≤0.3m/s | ||
FAQ
1.What is time of delivery?
Since our products are produced according to each specific order, the delivery period will be 15days after confirmation of order. If it is small or sample order, please do check with us about whether we have ready goods in stock to make delivery as soon as possible.
2.What about quality assurance?
We offer one year warranty period beginning from the time of shipment for medical equipment, Per minor problems, we can provide free spare parts for replacements, Per serious problems, we can make replacement of free charge. But if the machine is damaged due to rough handling during the transportation, we are free of any responsibility, but we will still provide help to the buyer issue claims against the shipping company or insurance company, thus all the spare parts or expenses should be borne by buyer.
3.What about the price level?
We are confident that our prices are competitive compared with those at the same quality level, since we have stayed in this filed more than 20years. And we always adhere to the principle of provide top quality products with competitive prices. We have already established our good fame in many countries, especially in Africa, Middle East, European, Asia and South American through year after year efforts.
4.Why we find some prices are very high compared with some other supplier, and from the picture or it's model number, all looks the same?
As China is still a developing country, there are only a few products with patent rights, and copy products l spread very fast in the market. Of course, the prices of those copy products with cheap material and less quality control are relatively cheaper .
5.What is payment terms?
T/T in advance,Western Union.
6.Which shipping company usually using?
MAERSK-LINE,PIL,COSCO,SAFMARINE,MARUBA,APL,CMA,CSAV,K-LINE,MSC,NYK,AND DHL,EMS,TNT,UPS FOR COURIER, buyer's option will be our priority.we will give suggestion according to the schedule and services.